No Tel:
03-79674299
Supervisor: Dr Zainol Abidin Ibrahim
Lecturer: Dr Zamri Zainal Abidin
Staff: Mohd
Raihan Hamzah
PROTOMAT S42
v
The
machine is circuit board plotter suitable for producing circuit board prototypes
and engraved films. It consists basically of a base plate, an X/Y motion system
and machining head. This machining head can be moved along both axes with the
aid of the X/Y motion system. The machining head can also be lowered. This
results in two basic processing possibilities.
v
This
circuit board plotter offers very high precision in machining and high
machining speed. Almost completely automatic processing is possible due to
other special functions like the adjustable depth with which the tool penetrates
the base material during drilling, which can be set via the software. All this helps to minimize the effort required for operation
in small series production.
PROTOMAT 91s
v
The machine is circuit board
plotter suitable for reducing circuit board prototypes and engraved films. It
consists basically of a base plate, an X/Y motion system and machining head.
This machining head can be moved along both axes with the aid of the X/Y motion
system. The machining head can also be lowered. This results in two basic
processing possibilities.
v
First,
a channel can be milled with a milling cutter in a piece of base material
fastened to the base plate by moving the lower machining head. Second, a hole
can be drilled in the base material by lowering the machining head when it is
standing still and a drill installed.
SOLDERING STATION
v This high-output, temperature
controlled soldering station uses a composite tip, incorporating heater and
sensor functions into one element. Several process control features, unique to
the
v
MODEL FM-202, make it applicable to a broad range
of soldering applications.
THE HAKKO FM-2024 DESOLDERING
MODULE
v
The
configurable hand piece uses quick-change composite nozzles and allows you to
choose either a gun style hand piece or pencil style hand piece.
SMD REWORK STATION
WITH VACUUM PICKUP
v
Digital
control and display of the time and temperature
v
Display
of air-flow rate
v
Manual
and automatic modes
v
Built-in
vacuum pickup
PREHEATER
v
This
unit generates hot air
v
Hot
air can cause severe burns of fire
v
Keep
flammable materials away from the outlet
MULTIPURPOSE MACHINE (BTR-55)
v
Hand
tool : Precision electric drill
v
9/18V
v
2
Amp Max
v
16,500
R.P.M
v
Soldering
station
v
Desolder
/ Hot Air ( DG-24100 )
DRILLING MACHINE
v
Type:
RH-06
v
Capacity:
6MM
v
Volt:
240V / 50Hz
v
Motor:
150W
MILLING & DRILLING MACHINE (ML-360)
v
Type:
ML-360 (TOYO) –
v
Volts:
220
v
Amp:
2.55
v
R.P.M:
2600
v
Given
By Dr
Raja Mustapha Raja Hassan